Pressed & Loose Powder
Multi-color Liquid Powder Filling Machine with 2 Compacting Stations

Multi-color Liquid Powder Filling Machine with 2 Compacting Stations


Model No.:

HX-PW12

Name:

Multi-color Liquid Powder Filling Machine

Specifications:

Dimensions

2,830mm (L) x 740mm (W) x 1,810mm(H)

Power Source

ØAC220

Air Pressure

68kg/cm2

Capacity

5 molds / min. 1-8 pcs / mold.

Introduction:

The main working process of the machine includes liquid powder filling,pressing and embossing. Firstly, the powder is mixed with solvent and stirred evenly in the cone-shaped tanks and fed to each tray cell respectively by pistons, then pressed and embossed to finished product. The machine is safe and easy to handle and only one operator is needed.

Target Products:

Fancy / Non-fancy Multi-color Eye Shadow or Blush with / without pearl pigments and so on.

Machine Features

1

The maximum feeding area is up to 90mm*140mm.the number of cavities will be decided according to the finished product size. 

2

With two compacting stations, the first one for pressing the shape of the color segments with vacuum suction to remove of the excess liquid and the second is for embossing the product surface with fabrics applied. Both compacting stations can be used at the same time or alternatively adopted.

3

Automatic suction Jig design reduces the liquid powder feeding 

deviation and defective rate.

4

The tanks are integrated with pushers, which shortens the movement to enhance the feeding speed and is applicable for high viscosity liquid powders. This patented design solved the inner leaking problem and only low viscosity liquid powder is applicable for the traditional powder feeding mechanism.

5

Cone-shaped Tanks with 3 direct links sloved the problems of the

flat-bottomed ones for the feeding failure caused by insufficient

remaining liquid powder, low feeding speed and slow powder

replacement.

6

With optional numbers, the rotating straight line feeding piston

cylinders are applied for easy operating and regulating,

leakproofness, less feeding pressure loss to stable the products quality.

7

Vacuum pump is supplemented to assist the powder feeding, which

helps to enhance the products quality and saves energy with lower

noise.

8

Double switch design of the feeding and mould avoids powder suck

back and vacuum in the feeding pipes.